IPv6 Ready Logo Program Phase-2 Application Form for IPsec
                                            (Available from 2008/12/09)

Target Informations:
  Vendor Name:  ________________________________
  Country Name: ________________
  Product Name: ________________________________
  Product Version:  ________________
  Product Classification (End-Node or SGW): ________________
  Product Description:  ________________________________________

Contact Person:
  Full Name:    ________________________________
  E-mail:   ________________________________

Test Result:
  * Test evidence should be attached with this application form

  Version of the test specification and scenario
    Self Test Specification:    ________________
    Self Test Tool: ________________
    Interoperability Test Scneario: ________________

  (If Target is OS/Protocol Stack,
   running environment has to be described below.)
  Environment for OS/Protocol Stack:    ________________________________

  Interoperability test results
    (2 interoperable devices from other vendors are required at each IPsec mode.
     Other vendors should be different.)

    End-Node (Transport):
      1. Vendor name:   ________ / Device name: ________ / Version: ________
      2. Vendor name:   ________ / Device name: ________ / Version: ________

    End-Node (Tunnel):
      1. Vendor name:   ________ / Device name: ________ / Version: ________
      2. Vendor name:   ________ / Device name: ________ / Version: ________

    SGW (Tunnel):
      1. Vendor name:   ________ / Device name: ________ / Version: ________
      2. Vendor name:   ________ / Device name: ________ / Version: ________

Target supporting Advanced Functions:
  If your device supports advanced function, please check the following items.

  Mode:
    It is mandatory for End-Node to support transport mode.
    And it is advanced for End-Node to support tunnel mode.
    A SGW is required to support only tunnel mode. 
    If SGW supports transport, then it will be applied as End-Node. 

    If End-Node supports tunnel mode, please check the following by "X".

    Tunnel: ________

  Policy:
    It is mandatory to support either of Bypass or Discard policy.
    Please check the supported policy by "X".

    Bypass:     ________
    Discard:    ________

  Algorithm:
    Please check the supported combination by "X".

    +-----------------------------------+---------------------------+
    | ESP Encryption                    | ESP Authentication        |
    +---------------------------+-------+-------------------+-------+
    | 3DES-CBC                  |   X   | HMAC-SHA1         |   X   |
    +---------------------------+-------+-------------------+-------+
    | AES-CBC (128-bit)         |       | AES-XCBC          |       |
    +---------------------------+-------+-------------------+-------+
    | AES-CTR                   |       |   NULL            |       |
    +---------------------------+-------+-------------------+-------+
    | NULL                      |       |
    +---------------------------+-------+
    | CAMELLIA-CBC (128-bit)    |       |
    +---------------------------+-------+

  IPsec v3 features:
    Please check the supported features by "X".

    Selector:
      Support of ICMP message type/code (*1):   ________

    TFC:
      Dummy Packet (No Next Header) handling:   ________
      TFC Padding (Transport Mode) (*2):    ________
      TFC Padding (Tunnel Mode):    ________

                                            (*1) must be tested by ICMP
                                            (*2) must be tested by UDP