IPv6 Ready Logo Program Phase-2 Application Form
for NEMO Mobile Router (Available from 2008/5/16)

Contact Person:
  Full Name: ___________________
  E-mail: ___________________

Target Information:
  Vendor Name: ___________________
  Country Name: ___________________
  Product Name: ___________________
  Product Version: ___________________
  Product Classification: Mobile Router
  Product Description: ___________________

Target supporting Functions:
  The Target must support following conditions.
    [X] Home Address derived from the Home Network Prefix

  The Target must support at least the following one.
    [ ] Implicit mode
    [ ] Explicit mode

  Target must support Basic Function.
    [X] Home Registraion (BU/BA w/ IPsec)

  If Target supports Advanced Function, please mark the following items.
    [ ] Real Home Link
    [ ] Dynamic Home Agent Address Discovery
    [ ] Mobile Prefix Discovery (MPS/MPA w/ IPsec)
    [ ] Fine-Grain Selectors

Test Information:
  If Target is OS/Protocol Stack, running environment has to be described below.
    Environment for OS/Protocol Stack: ___________________

  Logo ID of IPv6 READY Logo Phase-2 Core (router).
  (Target has to acquire or apply for IPv6 READY Logo Phase-2 Core beforehand.)
    Logo ID (or Application ID): ___________________

  Version of the Self Test and Interoperability Test Documents
    Self Test Specification: ___________________
    Interoperability Test Specification: ___________________

  Name and Version of Self Test Tool
    Self Test Tool: ___________________

  Interoperability tests
    Home Agent (Implicit mode):
    (2 interoperable devices/products from other vendors.)
      1. Vendor Name: ___________________ / Product Name: ___________________ / Product Version: ___________________
      2. Vendor Name: ___________________ / Product Name: ___________________ / Product Version: ___________________

    Home Agent (Explicit mode):
    (2 interoperable devices/products from other vendors.
     The same product is acceptable as Mobile Router (Implicit mode).)
      1. Vendor Name: ___________________ / Product Name: ___________________ / Product Version: ___________________
      2. Vendor Name: ___________________ / Product Name: ___________________ / Product Version: ___________________

Test Result:
  *Test evidence should be attached with this application form.